1/48 Academy F-16

by Jason Koh

--------------------

 

Hello, Fans & Residents of ARC! 

This is my first time to ARC and here's my humble rendition of the Academy Razorback F-16, built out of the box with some minor scratch detailing here & there. I'm not an expert, so you will have to excuse any technical errors of this particular jet.

Decals were from the kit.

Paints used were Tamiya, Gunze, Humbrol & MM.

Click on images below to see larger images

I had some fit problems with the wing-fuselage joint and the nose cone-upper fuselage half.  Lots of putty and some CA was used to fix the wing joint. I used some scrap stretched sprue to fill up the gap of the nose cone.

I modded the front office instrument panels and seat with some 2 part epoxy putty (Tamiya) to add some flavour. It's not perfect, but at least it's an improvement (to me anyways) to just using decals. Tape was used for the seatbelts.

Click on images below to see larger images

I suppose the three rail AGM launcher is no longer in fashion, but I used it anyway since I didn't have / scratch the single rail.

Until next time, happy modeling wishes to all.

Questions / comments welcome.

Jason 

Malaysia

Click on images below to see larger images

Photos and text © by Jason Koh